Top Load Tester for Bottle and Jars
“TBG” Top Load Tester is used for measuring vertical strength of bottle. Good strength avoids damage of bottles during stacking, Transportation, Storage and packing. Bottle Compression Tester is efficient and easy to use equipment intended for measuring the ability of bottle to resist external compressive forces. This method describes how to determine the resistance of a bottle to compressive forces. This is accomplished by placing the bottle between two flat platens, one of which is mechanically driven to compress the bottle. A recording device is incorporated to indicate the force required to compress the bottle. The method is used to compare the compressive resistance of different lots of similar bottles or to compare bottles of different grades.
The instrument is made in two parts, one is for main instrument and the other is the control panel. The ultimate test is to determining overall quality and performance of the bottles and jars. The instrument is bright chrome plating, zinc plating, painted in metallic paints. It is supplied complied with electrical which include micro-switches, Push buttons and contactors for safe and convenient operation.
In Computerized model, we provide the Window based software which gives the different measurement parameter and the graph. The report can be printout by using proper printer. The variable speed model speed is vary by a knob fixed on the panel and the speed also digitally indicated on the control panel of the instrument or by simply types the speed on the monitor of the computer. Different model have speeds suitable for testing different materials. Various built in safety arrangements such as over travel protection, are provided.
Transparency Tester Ball Integration Type
Method of Test for Transparency
GENERAL Test specimen shall be prepared from the part of container where markings are not found. TEST SPECIMEN The size of test specimen shall be 50 mm * 50 mm and the thickness shall be the original thickness of the test specimen. The test specimens shall be prepared. Method of Test for Transparency MEASUREMENT Install the white standard plate, adjust the reading (T₁) of the device's current meter to be 100; adjust the amount of incident light. Under the status where the white standard plate is installed, install and measure the test specimen to obtain the indication (T₂) of the current meter. The full light transmittance shall be calculated according to the following formula: T₁ T = -------- x 100 T₂ where T = full light transmittance, percent
Hot Wire Bottle Cutter
TBG Hot Wire Bottle Cutter offers an easy and cost saving way for cutting containers for section weight analysis. A clean section without deformation will be obtained by a quick cutting of bottles through heated hot wires. A precision and repeatable cutting task is easy to achieve and it’s necessary for a proper analysis.
With TBG, a PET bottle could be cut up to 5 predetermined sections, each section will be checked to ensure that it conforms to the exact weight assigned.
Bottle Drop Tester
Model : TBG-15DRP
Essential for quality control and development for consumers of corrugated and solid fibre board, shipping containers, bottles, filled bags etc.
Drop test is intended for use in evaluating the capability of a container, corrugated box, filled bags, bottles and other similar items to with stand the sudden shock resulting from a free fall, or to evaluate the capability of these and its inner packing to protect its contents during the sudden shock resulting from a free fall. Drop test method may also be used to compare the performance of different package designs. This test method may also permit observation of the progressive failure of a these items and the damage to its contents.
RELATED STANDARD
IS 7028 (Part VI) 1973
Base Clearance Tester
Application
The Base Clearance Gauge is specifically designed to measure the dome height in the bottom of PET containers. The Base Clearance Gauge comes complete with a high accuracy, digital readout with built-in port for serial communications. A see-through base ensures clear visibility as measurements are taken.
Used to measure the dome height in the bottom of the bottle
Bottle Height Gauge
Fill Height Gauge Works As Laboratory Tool That Improves Accuracy During Measurements Involving Container Fill Height And Volume. The Gauge Allows Operators To Also Adjust Fill Level Of Containers That Need To Be Evaluated To Standard Predetermined Level. The Adjustable Gauge Operations Also Allow Operators To Set Depth Of Pipette For Appropriate Level With Excess Fluid Drawn Off To End Of Pipette.
Applications
For Fill Height And Volume Measurements In- Bottle Filling Industry
Vibration Tester
The transport packages in all distribution system are subjected to varying intensities of vibrations.
Vibration Test is carried out to assess the performance of a Bottles Pack, Closure’s box, filled package in terms of its strength or protection that it offers to its contents when subjected to vibration. This test method simulates the transport hazards, to produce an equivalent effect or damage during the test.
The equipment is suitable for testing containers of any form, material, kind, design with interior packing, means of closure and any size and weight.
RELATED STANDARD:
ASTM: D999-96, TAPPI: T817 om-89, FEFCO: TM 52 1999
Melt Flow Index Apparatus
Melt Flow of thermoplastic material is defined as the rate of flow in grams per ten minutes of extrude of molten resins through a jet of a specified length and diameter under prescribed conditions of temperature, load & piston position in a cylindrical cavity inside a heated metallic tube barrel at the measurement is being made.
Melt Flow Index Apparatus for Plastic consists of a heated extruder tube, an interchangeable jet through which the material under test is extruded, and a piston with dead weights to apply the specified pressure on the material inside the extruder tube. The extruder tube is made from carbon steel and is heated by means of a Bend Heater, which surrounds its outer circumference. A PID controller is provided to indicate & control the temperature of the tube. The tube has a whole parallel to its bore for placing the thermocouple junction. The heater logged with mineral wool insulation. The assembly is fixed on a rigid stand. The bottom of the tube is lagged with a 3 mm thick insulation of PTFE to prevent sticking of the extrude. The jet through with the extruder is pushed out is made from hardened and ground die steel. It is held at the bottom of the extruder tube. The piston made from silver steel relieved at the upper end is provided to push the extrude out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston. The top of the piston carries a plate-form for keeping the load on. The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, DIGITAL PRESET TIMER at other electronic components. Cleaning tools for tube cavity and jets & stoppers & cutter for the extradite are also supplied with the equipments.
Closure Torque Tester
Torque Tester is used for Measuring Incremental / Removal torque of closures. Round / Square/ Rectangular /Oval Bottles / Jars can be held.
Closure Concavity Tester
APPLICATION
Closure Concavity Tester is useful for bottle closure. It is provided with digital gauge for more accurate measurements.
Colour Matching Cabinet
TBG Colour Matching Cabinet is used for visual inspection of any colour material like textile, paper, paint, ink, Plastic etc. Standard Light sources are used for accurate testing and inspection. Colour Matching Cabinet is made of Ply Board or MS Sheet as per availability at the time of delivery. This Light Box is also known as Shade Matching Booth.
Light Sources & Colour Temperature
- Artificial Daylight Fluorescent Lamps (D - 65) : 02 Nos.
- Artificial Daylight Fluorescent Lamps (D - 50) : 01 Nos.
- Triphosphor Fluorescent Lamp (TL-84) : 01 Nos.
- Ultra Violet Black Lamp (UV) : 01 Nos.
- Cool White Fluorescent (CWF) : 01 Nos.
- Tungsten Filament Light : 04 Nos.
Go No Go Gauge for Closure
Application
This gauges are useful for inspection of pet bottles closures saves time required for inspection of closures. Made from stainless steel.
Preform / closure gauges
Gauges for different neck sizes are available.
- 1810
- 1881
- 29/25
- 30/25
- Alaska
- Inside diameter
- Outside diameter
- Maximum diameter.